PCB의 기초(Printed Circuit Board Basics)

10. 참고문헌 (Reference)

1) Montrose, M. 1999.
   EMC and the Printed Circiut Board Design-Design, Theroy and Layout Made Simple. Piiscataway, NJ:IEEE Press
2) Gerke, D., and W. Kimmel. 1994.
   "The Desinger's Guide to Electromagnetic Compatibility." EDN (January 20)
3) Whitaker, J.1996. The Electronics Handbook. Boca Raton, FL:CRC Press
4) Radu, S., et al.1998 "An Impact of Layer Stack-up on."
   Proceedings of the IEEE International Symposium on Electromagnetic Compatibility, pp.828~823.
5) Paul, C.R 1992.
   Introduction to Electromagnetic Compatibility, New York: John Wiley & Sons.
6) Ott, H. 1988.
   Noise Reduction Techniques in Electronics System. 2'nd ed. New York: John Wiley & Sons
7) Johnson, H.W., and M.Graham. 1993.
   High Speed Digital Design. Englewood Cliffs, NJ: Prentice Hall.
8) R.F German, H. Ott, and C.R. Paul. 1990. "Effect of an Image Plane on PCB Radiation."
   Proceedings of the IEEE International Symposium on Electromagnetic Compatibility, pp.284~291.
9) Hsu, T. 1991. "The Validity of Using Image Plane Theory to Predict Printed Circuit Board Radiation."
   Proceedings of the IEEE International Symposium on Electromagnetic Compatibility, pp.58~60.
10) Mardiguian, M. 1992.
   Controlling Radiated Emissions by Design. New York: Van Nostrand Rein hold.
11) Montrose, M.I. 1991. "Overview of Design Techniques for Printed Ciecuit Board Layout Used in High Technology Products."
   Proceedings of the IEEE International Symposium on Electromagnetic Compatibility, pp.61~66.
12) Woody, J.A., and C.A. Pauldi. 1980. " Modeling Techniques for Discrete Passive Components to Include Parasitic Effects in EMC and Design. "
   Proceedings of the IEEE International Symposium on Electromagnetic Compatibility, pp.39~45.

Old - 1'st Edition
1) Technical definition and explanation provided by W.Michael King
2) German, R.F., H. Ott, and C.R.Paul. 1990. Effect of an image plane on PCB radiation.
   Proceedings of the IEEE International Symposium on Electromagnetic Compatibility.
   New York: IEEE, 284-291
3) Hsu, T. 1991. The validity of using image plane theory to predict PCB radiation.
   Proceedings of the IEEE International Symposium on Electromagnetic Compatibility.
   New York: IEEE, 58-60
4) Mardiguian,M. 1992. Controlling  Radiated Emissions by Design.
   NewYork: Van Nostrand Reinhold
5) Montrose, M.I. 1991. Overview of design techniques for printed circuit board layout used in high technology products.
   Proceedings of the IEEE International Symposium on Electromagnetic Compatibility.
   New York: IEEE
6) 1991. EMI Considerations for High Speed System Design. CKC Laboratories.
7) Dockey, R.W., and R.F. German 1993. New techniques for reducing printed circuit board common-mode radiation.
   Proceedings of the IEEE International Symposium on Electromagnetic Compatibility.
   New York: IEEE, 344-339


기술 자료 << PCB의 기초
<<  9. 임계 주파수(λ/20)